– Powerfull motor at low engine speed : allows pulling tools with fuel consumption reduced
– Chassis with mechanical variable track adjustment : can be adapted to different widths of vineyard
– Chassis specially designed for soil preparation : driveability, low ground pressure, perfect load distribution
– Wide steering angle: easy to maneuver.
– High driveability, torque/transmission : allows progressive and smooth manoeuvres.
– Power take-off adjustment : power consumption reduced. Flow regulator in cab.
– Hydraulic power take-off : for all works including the most consuming
– Carrying platform : for a wide range of equipment
– Protective hoop
– Road lights and signs according to regulations
– Seatbelt
– Low center of gravity : good stability
– Double mirrors : good visibility on the back and on the soil tools
– Pneumatic seat with ergonomic armrest : adjustable and user-friendly
– Adjustable steering column : a driving platform adapted to the morphology of the driver and working conditions
– Particular chassis design : high visibility on tool-holders and below the cab
– Hydraulic electro-distributors : with a multifunctions joystick to ensure a sensitive control of the tools.
– Driving platform : perfect visibility on the road and at work
– Front and rear coupling devices : the tractor can be fitted with outils in rear and front position.
Tecnoma offers a tool range and accessories for all vineyard works
SPRAYING
Equipment for pneumatic spraying or PRECIJET.
TRIMMERS
Fast set up thanks to the chassis. From 1 to 4 rows, the blades are boomerang-shaped that allow an important penetration in the canopy, height adjustment, cutting adjustment
PRE-PRUNER for trellised vineyard
Fast set up thanks to the chassis. 3 types of pre-pruners with hydraulic opening. 1 row or 2 rows.
INTERCEPS
These tools are designed for superficial soil works. The soil maintenance tools (interceps) are fitted on a hook system on the tool-holder of the straddle tractor
MOWERS
Grass cover has a beneficial effect if it is controlled. The mowers are fitted on a hook system on the tool-holder of the straddle tractor
DRILL
The drill is used to plant or transplant vine plants.
MAGA CERTIFIED
Total weight : 3 130 kg
CHASSIS
– 3 row. welded rectangular boxed profiled inclined chassis
– Motor in low position in the central row
– 140 cm clearance
– Mechanical variable track adjustment (manual adjustment) from 205 to 230 cm
– Wheelbase : 235 cm
– 4 equal wheels
MOTOR
– DEUTZ motor 79 hp – 2600 tr/min maxi
– Air/oil cooling
– Motor in low position in the central row
– Fuel tank : 115 litre
TRANSMISSION
– Hydrostatic transmission on 4 wheel drive
– Differential locking valves
– Independent rear brake with electric control
– Hydro-pilot
– Parking brake
– 2 speed ranges : 0-12 km/h and 0-25 km/h
DRIVING PLATFORM
– Canopy
– Certified protective hoop
– Pneumatic seat and adjustable steering column
– Ergonomic armrest with multifunction joystick gathering hydraulic and hydrostatic functions and tasks manager
– Orditrac : board computer
– Battery master switch
– Road lights and signs
– Double mirrors on each side
– Working lights (front and rear)
HYDRAULICS
– Main hydraulic exit : gear pump 105 l/min maxi – 200b with coupling device. Electric autoregulated adjustable flow 0 – 105 l/min with manual regulator
– Sub hydraulic exit : gear pump 35 l/min – 200b with front and rear coupling devices. Electric autoregulated adjustable flow 0 – 35 l/min with manual regulator
– 5 hydraulic distributors
MAGA certified
Total weight : 3 360 kg
CHASSIS
– 3 row. welded rectangular boxed profiled inclined chassis
– VITIS 580 T : fore central cab and motor in high and transversal position behind the cab
– VITIS 580 TM : fore and setback central cab (setback of 30 cm) and motor in high and transversal position behind the cab
– 140 cm clearance
– Mechanical variable track adjustment (manual adjustment) from 205 to 230 cm
– Wheelbase : 235 cm
– 4 equal wheels
MOTOR
– DEUTZ motor 79 hp – 2600 tr/min maxi
– Air/oil cooling
– Motor in high and transversal position behind the cab
– Fuel tank : 90 litre
TRANSMISSION
– Hydrostatic transmission on 4 wheel drive
– Differential locking valves
– Independent rear brake with electric control
– Hydro-pilot
– Parking brake. Safety brake
– 2 speed ranges : 0-12 km/h and 0-25 km/h
DRIVING PLATFORM
– Canopy
– Certified protective hoop
– Pneumatic seat and adjustable steering column
– Ergonomic armrest with multifunction joystick gathering hydraulic and hydrostatic functions and tasks manager
– Orditrac : board computer
– Battery master switch
– Road lights and signs
– Double mirrors on each side
– Working lights (front and rear)
HYDRAULICS
– Main hydraulic exit : gear pump 105 l/min maxi – 200b with coupling device. Electric autoregulated adjustable flow 0 – 105 l/min with manual regulator
– Sub hydraulic exit : gear pump 35 l/min – 200b with front and rear coupling devices. Electric autoregulated adjustable flow 0 – 35 l/min with manual regulator
– 5 hydraulic distributors
MAGA CERTIFIED
Total weight : 3 150 kg (VITIS 590) and 3 170 kg (VITIS 5100)
CHASSIS
– 3 row. welded rectangular boxed profiled inclined chassis
– Motor in low position in the central row
– 140 cm clearance
– Mechanical variable track adjustment (manual adjustment) from 205 to 230 cm
– Wheelbase : 235 cm
– 4 equal wheels
MOTOR
– VITIS 590 : DEUTZ motor 92 hp – 2600 tr/min maxi
– VITIS 5100 : DEUTZ motor 101 hp – 2600 tr/min maxi
– Water cooling and Intercooler
– Motor in low position in the central row
– Fuel tank : 110 litre
TRANSMISSION
– Hydrostatic transmission on 4 wheel drive
– Differential locking valves
– Load shedding of the front wheels (VITIS 5100)
– Hydro-Pilot
– Parking brake. Safety brake
– Independant rear brakes electrically operated
– 2 speed ranges : 0-13 km/h at workd and 0-27 km/h on the road
DRIVING PLATFORM
– Canopy
– Certified protective hoop
– Pneumatic seat and adjustable steering column
– Ergonomic armrest with multifunction joystick gathering hydraulic and hydrostatic functions and tasks manager
– Orditrac : board computer
– Battery master switch
– Road lights and signs
– Double mirrors on each side
– Working lights (front and rear)
HYDRAULICS
– Main hydraulic exit : piston pump 130 l/min maxi – 300b with coupling device. Electric autoregulated adjustable flow 0 – 130 l/min. Electric control in cab
– Sub hydraulic exit : gear pump 40 l/min – 200b with front and rear coupling devices. Electric autoregulated adjustable flow 0 – 40 l/min with manual regulator
– 5 hydraulic distributors
HYDROPILOT
Control and regulation of the working speed of the tractor insured : an adjustable speed range according to the required sensitivity, steady forward speed even in case of variation of the relief or the engine speed. Ability to change the speed reference during operation, high accuracy of doses applied in spraying and fertilizer spreading.
ORDITRAC
Information about :
– PTO speed,
– forward speed
– distance measure
– surface calculation