TECNOMA offers many solutions to make your viticulture more precise and responsible, input gains and considerable savings for the operating managers.
The VITITOP interface (ISOBUS interface) on S.T.P, TXH 110 and AXH 110 straddle tractors is shared into 2 terminal.
One is dedicated to main functions of the tractor and the other is used for tools functions.
With the VITITOP interface, all options of precision viticulture are available with GPS antenna : guidance in vine plots, traceability. With ISOBUS spraying equipment, automatic boom section control is possible.
An efficient and responsible agriculture implies also equipment ensuring optimal application and focusing over the target such as the Permanent boom circulation with AGP.
Tecnoma offers, with its PRECIJET spraying system, a device to allow a permanent circulation (chemicals or clean water) in the water circuit up to the diffusers and the cut off of each nozzle thanks to a pneumatic anti-drip device (AGP). The pneumatic anti-drip device is driven by air pressure via a compressor.
GPS-related functions - VITITOP interface
This application requires : Guidance Licence + GPS receiver
It guides the driver depending on :
- the number of worked rows
- the surface area already covered
- the limits of the vine plot
The guidance modes available
Regardless of the guidance system used, the basic principle consists of defining a reference line (path to be followed), then the integrated system follows the parallels to the reference line by using the satellite signals and taking into consideration the width of the tool. The reference line does not necessarily have to be straight.
User benefits :
- To guide taking account of the working width
- To locate obstacles (poles, trees, huts…)
- To map vine plots
- To map and store work carried out or in progress
The inclinometer is a correction system. It requires : Guidance licence + GPS receiver
When the tractor is equipped with a GPS antenna and the vine plot is undulating, the signal must be corrected in order to avoid a positioning error that increases progressively. The correction depends on the slope and the height of the antenna.
This application requires : Automatic boom section control Licence + Guidance Licence + GPS receiver + ISOBUS spraying unit
This application is used with the spraying function. The principle is to close or start the sections automatically to suit the zones to be sprayed (to avoid overlapping) or outside the planted areas.
User benefits :
The sections are closed and started automatically :
- At the end of the vine plots, at the headland or intermediate areas
- When there is overlapping with one or several rows that has already been sprayed
- At the end of the row
To be more efficient, Tecnoma recommends a RTK receiver (precision : 2,5 cm)